Collin Accelerated Kinetic Friction Lab - v0.1
Instructions for use:
1. Choose your bottom material (wood or felt).
2. Select a mass mh.
3. Click the 'Start Simulation' button.
4. Look at the graph at the left. The slope of the best fit line will be the acceleration. You want your value to be around +0.5-0.6 m/s^2. Repeat steps 2 and 3 until that happens, and then record mh and the acceleration.
5. Hit the bottom button (says "mb = 120. g" by default) to add or remove 120. g to the block, reset the simulation, and repeat steps 2 - 4.
6. Change the bottom material and repeat steps 2-5.